| Forged U-bolt wire rope clip | Forged carbon steel | Common catalog sizes range from about 1/8 in to 1-1/2 in (about 3 mm to 38 mm); available sizes depend on the product series. | Often hot-dip galvanized; other finishes may be offered. | There is no single rating for all clips of this type. Compare the stated working load limit (WLL), rope diameter, clip count, spacing, and installation instructions for the specific product. | Request quantity breaks by rope diameter and finish. Confirm packaging quantities and whether nuts are included. | General-purpose wire-rope terminations where the selected product and installation method are appropriate for the application. |
| Malleable-iron U-bolt wire rope clip | Malleable iron body with steel U-bolt and nuts, depending on design | Commonly offered in small and medium wire-rope diameters; verify the product’s marked size range. | Often galvanized or zinc-coated, depending on specification. | Do not infer capacity from clip size or appearance. Use only the rating and assembly instructions provided for the exact clip and rope combination. | Compare carton quantity, unit price at each order tier, coating specification, and product identification on packaging. | Light- to general-purpose wire-rope assemblies when allowed by the applicable product instructions and use requirements. |
| Stainless-steel U-bolt wire rope clip | Stainless steel; grade 316 is commonly selected for improved corrosion resistance, while other grades may also be available. | Available in a range of rope diameters; confirm the clip’s stated size and compatibility with the rope construction. | Typically stainless finish; surface appearance varies by manufacturing process. | Ratings are product-specific and may differ from carbon-steel versions of the same nominal size. Check the published WLL and installation requirements. | Ask suppliers to identify the stainless grade, traceability documentation, and price breaks by size and order quantity. | Marine, outdoor, and corrosive environments where the specified stainless grade is suitable. |
| Drop-forged wire rope clip | Forged steel; material and grade should be stated in the product specification. | Multiple sizes are commonly available; select by the actual wire-rope diameter, not by nominal rope use alone. | Commonly galvanized or supplied with another specified protective finish. | Check the manufacturer’s WLL, proof-test information if supplied, required number of clips, and assembly efficiency instructions. | For bulk orders, compare material certificates where required, inspection documentation, lead time, and consistent sizing across the shipment. | Applications requiring a specified forged clip, subject to the product rating and governing requirements. |
| Duplex / double-saddle wire rope clip | Steel or stainless steel, depending on the product | Size range varies by design; verify compatibility with the rope diameter and construction. | Varies by material and supplier specification. | Use the rating and installation instructions for the exact duplex design. Do not substitute a rating from a U-bolt clip of similar size. | Confirm whether the assembly is supplied complete and compare per-piece pricing at the same size, material, and finish. | Wire-rope terminations where the product design is specifically selected and installed according to its instructions. |